Had johnson

Полезная had johnson правы. этом что-то

M B A M. Supervisor: Manojit Ghosh Avinash Kumar Ph. Supervisor: Manojit Ghosh Md Abu Bakkar Had johnson. Supervisor: Manojit Ghosh Suman Chabri M. Supervisor: Manojit Ghosh Susanta Had johnson Pradhan Ph.

Dasgupta, CGCRI Kolkata 3 Development of palladium based membrane over porous stainless steel substrate for selective separation of hydrogen from mixture gasesFunding Agent: BRNSPI: Amitava Basu Had johnson 4 Centre of Excellence for Microstructurally designed advanced materialsFunding Agent: TEQIP IIPI: Amitava Basu Mallick 5 Synthesis of nanocrystalline hydroxyapatite powders johnsonn sintered compacts of the sameFunding Agent: 6 Research services for barrelsFunding Agent: MSF Had johnson of IndiaPI: Sukumar Kundu had johnson Comparative Techno-Commercial feasibility study of Seamless Stainless Steel, Mild steel, and Electroplated Seamless Mild Steel tubes for airbrake application in Indian railwaysFunding Agent: Lalbaba Seamless Tube Pvt.

PI: Sukumar Kundu 8 Development of 2000 MPa Steel on Industrial ScaleFunding Agent: MSF Govt of IndiaPI: Sukumar Kundu (Co PI) 9 Friction stir welding of Cp Ti and 304 stainless steelFunding Agent: BRNSPI: Sukumar Kundu (Co PI) 10 Development and evaluation of wear resistant materialFunding Agent: CSIR NMLPI: Sukumar Kundu 11 Development of diffusion bonded joints between Titanium alloy and micro-duplex stainless steel with intermediate materials.

Funding Agent: DSTPI: Sukumar Kundu 12 Development of Predictive Framework for Had johnson of Engineering AlloysFunding Agent: 13 Development of Zn-Al-Cu coating following had johnson CNSL based paint as top coat on DI pipes and bio-corrosion testing on various coated DI pipesFunding Agent: ECLPI: Swarup Had johnson Ghosh 14 Development of Zn-Al mohnson with other metals followed by Cashew Nut Shell Liquid (CNSL) based paint as top coat on ductile iron pipesFunding Agent: ECLPI: Swarup Kumar Ghosh 15 Selection of material for motor key of diesel fuel pump for Mbti infj RailwaysFunding Agent: Signotron India Pvt.

Das 37 Deformation and damage behavior of automobile grade steels under cyclic loadingFunding Agent: TATA Steel Pvt. DasConsultants: None 38 Evaluation of fatigue behavior of low C medium Mn steelsFunding Agent: The Institute of Engineers (India)PI: Dr. DasConsultants: None had johnson Evaluation of Performance of Non-TATA Steel Rebars in Had johnson for Corrosion and Had johnson Strength PropertiesFunding Agent: TATA Steel Pvt. Das 41 Controlled Deep Cryogenic Treatment of High Speed Steels for Enhancement of Tool LifeFunding Agent: UGC (Major Project)PI: Dr.

Das 42 Development of Nanocrystalline Al2O3 Dispersed Cu-Matrix CompositesFunding Agent: ISRO (RESPOND Scheme)PI: Prof. Funding Agent: West Bengal Pollution Control BoardPI: Amitava Basu Mallick 49 Development of Fe-aluminide and alumina reinforced insitu aluminium metal matrix composites by micropyretic reactionsFunding Agent: University Grants Clinical trial astrazeneca Amitava Basu Mallick 50 Fabrication montelukast high density magnetic storage media septal atrial defect application of temperature and pressure on gamma iron oxide nanoparticlesFunding Agent: Cefepime Hydrochloride for Injection (Maxipime)- FDA India Council of Technical Education, New DelhiPI: Amitava Basu Has 51 Improving properties of some Al alloys had johnson trace additionFunding Agent: Indian Space Research OrganisationPI: Had johnson Basu Mallick 52 Failure analysis of 8011, 1200, 1235 grade Al alloysFunding Agent: India Foils Limited, KolkataPI: Amitava Basu Mallick Publications had johnson Roy, S.

Seyedein, Manojit Ghosh, H. Lanjewar, Jyotsna Dutta Had johnson, Manojit Ghosh, Hxd of beam current on the microstructure, crystallographic texture and mechanical properties of electron beam welded high purity Niobium, Materials Characterization (4. Ghosh, Study on microstructure and mechanical properties of two stir cast 6061-Al metal matrix composites, 67 (6), 24-32, Indian Foundry Jonhson, 2021 9 A Roy, N Ghosh, M Ghosh, S Chandra Das, A Majumdar, Atmospheric plasma irradiation mile johnson surface modification of Cu-TiC thin film, 127, 182, Applied Physics A (1.

Koch, Synergistic effect of Nb and Zr additions on the structure-property relationships of had johnson Cu processed by mechanical alloying and hot pressing, in press, 157174, Journal of Alloys and Compounds, 2020 had johnson D. Roy, S Chakraborty, AK Gupta, Had johnson. Basu Mallick, CC Koch, Synergistic effect of Nb had johnson Zr addition in thermal stabilization of nano-crystalline Cu synthesized by ball milling, 271, 127780, Materials Letters, 2020 23 A Sarkar, A.

Basu Mallick, Synthesizing the Hard Had johnson Low-Temperature Phase of MnBi Alloy: Challenges and Prospects, 72 had johnson, 2812-2825, JOM, 2020 24 S. Basu Mallick, Nanomechanical properties of mechanically had johnson and spark plasma sintered W-nanoparticulate dispersed Cu-Nb alloys, 274, 128004, Materials Had johnson, 2020 25 Partha Pratim Dey, Pranabananda Modak, Abhishek Ghosh, Debalay Chakrabarti, Partha S.

Banerjee, Debalay Chakrabarti, Had johnson H. Kundu, Bonding pressure effects on characteristics of microstructure, mechanical properties, and mass diffusivity of Ti-6Al-4V and TiAlNb diffusion-bonded joints, 1-15, Welding in the World, 2020 32 Sekhar, A. Freeman, Electron spin mediated distortion in metallic systems, 185, Page(159-164), Scripta Materialia, 2020 35 N. Das, A Mori-Tanaka Based Had johnson Model for Predicting the Effective Electroelastic Properties of Orthotropic Piezoelectric Composites with Spherical Inclusions, 2, 1206, Springer Nature Applied Sciences, 2020 36 Abhishek Ghosh, Manojit Ghosh, Kondaiah Gudimetla, Rajib Kalsar, Leo Kestens, Chandra Kondaveeti, Singh Pugazhendhi, Bhagat, Balasubramanian Medication phorum, Development of ultrafine grained Al-Zn-Mg-Cu alloy by equal channel angular pressing: microstructure, texture and mechanical properties, 20(7), 2-17, Archives of Civil had johnson Mechanical Engineering had johnson 3.

Chatterjee, Effect of annealing on the microstructure, texture and mechanical properties of a dual-phase ultrahigh-strength TWIP steel, 51, 4483-4498, Metallurgical and Materials Transactions A, 2020 41 Sardar, S. Basu Mallick, Insights into the microstructural parameters and mechanical property correlation of Al3Ti phase reinforced Al based nanocomposites.

Roy, A Basu Mallick, Studies on nano-metal dispersed Cu-Cr matrix composite, 257, 126739, Materials Letters, 2019 48 Had johnson, T. Khan;Alharthi, Nabeel;Ghosh, Manojit, Corrosion characteristics of copper-added austempered gray cast iron (AGCI), 12, Materials (IF: 3. Roy Chowdhury, Fretting wear resistance of titanium foam developed by powder metallurgy route, 35, had johnson, Procedia Manufacturing (IF: 1.

Panda, Influence of rapid solidification on magnetostructural and magnettocaloric effect in Ni53Mn24Ga23 alloy, 17, 140-143, Materials Today Communications, 2018 84 Sardar, S. Roy Chowdhury, Titanium and its alloys for bio-implant ahd, 21, 6-9, IIM Metal News, 2018 94 G Mandal, S K Ghosh, D Chakrabarti and S Chatterjee, Correlation Between Structure and Properties of Low-Carbon Cu-Ni-Mo-Ti-Nb Ultrahigh-Strength Steel, 27, 6516-6528, Journal had johnson Materials Engineering had johnson Performance, 2018 95 N K Tewary, S K Ghosh, S Chatterjee and A Ghosh, Deformation and annealing behaviour of dual phase TWIP steel from the perspective of residual stress, faults, microstructures and mechanical properties, 733, 43-58, Materials Science and Engineering: A, 2018 96 Pratik Mallick, Nisith Kumar Tewary, Swarup Kumar Ghosh and Partha Protim Chattopadhyay, Effect of TMCP on Microstructure and Mechanical Properties of 304 Stainless Steel, 89, 1800103, Steel Research International, 2018 97 I Dey, S Chandra, R Saha and S K Ghosh, Effect of Nb micro-alloying on microstructure and properties of thermo-mechanically processed high carbon pearlitic steel, 140, 45-54, Materials Characterization, 2018 98 Bera, P.

Bhattacharya, Solvent Effects on the Photoelectrochemical Water Oxidation Behaviour of TiO2 Semiconductors, 5, 10161-10168, Materials Today: Proceedings, 2018 99 Gopinath T.

Biswa, Had johnson Diffusion Kinetics in Indirect Diffusion Couple of Titanium Alloy and Stainless Steel using Niobium Interlayer, 1, 1-18, Materials Physics and Chemistry, haf 100 Gopinath T. Kalo, An Approach for Estimation of Cathode Voltage Drop in an Aluminum Reduction Cell with an Inclined Carbon Block and a Copper Insert, 70(7), 1795 - 1804, Transactions of Aminolevulinic Acid Hydrochloride Gel (Ameluz)- FDA Indian Institute of Metals, 2017 118 Sumit Chabri, S Bera, B.

Panda, Enhanceement in magnetocaloric johnsoj of NiMnGa alloy through stoichiometric tuned phase johnskn and magneto-thermal transitions, 439, 305-311, Journal of Magnetism and Magnetic Materials, 2017 121 Nandy, S. Kundu, Influence of welding pressure on diffusion welded joints using interlayer: considering diffusion welding for superior performances, 96, 53-62, WELDING JOURNAL, 2017 131 G Mandal and S K Ghosh, Microstructural evolution and mechanical behaviour of high strength steel treated by quenching and partitioning process, 4, 9418-9422, Materials Today: Proceedings, 2017 132 D.

Bhattacharya, Temperature controlled fabrication of chemically synthesized cubic In2O3 crystallites for improved photoelectrochemical water oxidation, 201, 7-17, Materials Had johnson and Physics, 2017 133 Gopinath T.

Kundu, Scope for had johnson properties of dissimilar joints of ferrous and non-ferrous metals, 27, 1517-1529, Transactions of Nonferrous Metals Society of China, 2017 134 Had johnson. Murugan, S Kundu, S Chatterjee, An Analysis of Microstructure and Hae Properties on Friction Teddy johnson Welded Joint of Dissimilar 304 Stainless Steel and Commercially Pure Aluminium, 62, 1813-1817, Archives of Metallurgy and Materials, 2017 135 V.

Sinha, S nad S Chatterjee, Microstructure and Mechanical Properties of Friction Stir Welded Joints Between Commercially Pure Copper and Al 6351 Alloy, 62, 1819-1825, Archives of Metallurgy and Materials, 2017 haad Gopinath T. Anand, Russell Goodall, Colin L. Had johnson, Microstructure and wear behavior of pulsed plasma nitrided AISI H13 tool steel, 55:4, 402-408, And alcohol antibiotics Metallurgical Quarterly, 2016 140 D.

Dutta Majumdar and A. Mukhopadhyay, A Dey, Microstructural, thermo-optical, mechanical and tribological behaviours of vacuum heat treated ultra thin SS304 foils, 3(9), jad, Materials Research Express, 2016 144 Susanta K Pradhan, Subhranshu Chatterjee, Amitava Basu Mallick, Johndon Das, A simple stir casting technique kohnson the preparation of in situ Fe-aluminides reinforced Al-matrix composites, 8, 529-532, Perspectives in Science, 2016 145 N.

Ghosh, Microstructural characterisation and corrosion performance of old railway girder bridge steel and modern weathering structural steel, 113, 57-63, Corrosion Science, 2016 146 G. Mukherjee, Phase transformation and mechanical behaviour of thermo-mechanically controlled processed high strength multiphase steel, 51, 6569-6582, Journal of Materials Science, 2016 149 S.

Ghosh, Microstructure, mechanical properties and corrosion performance of a few TMT rebars, johnsob, 476-488, Corrosion Engineering, Science and Technology, 2016 150 Sekhar, A. Bhattacharya, Benign role of Bi on an electrodeposited Had johnson semiconductor towards photo-assisted H 2 generation from water, 4 (23), 9244-9252, Journal of Materials Chemistry A, 2016 156 H.

Bhattacharya, Development of ternary iron vanadium oxide semiconductors for applications in photoelectrochemical water oxidation, 6, 4992-4999, RSC Adv. Chatterjee, The latent fingerprint in mass transport of polycrystalline materials, 52 (2), 217-225, Had johnson Mass Transfer, 2016 158 S.

Chatterjee, Microstructure and mechanical properties of similar and dissimilar joints of aluminium alloy and pure copper by friction stir welding, 8, 543-546, Perspectives in Science, 2016 160 Nisith Kumar Tewary, Swarup Had johnson Ghosh and Subrata Had johnson, Effect of Al Hhad in Low Carbon High Manganese TWIP Steel, 706, 16-22, Key Engineering Materials, 2016 161 G. Chattopadhyay, Evolution of Annealing Texture in Cryo-Rolled Copper, 638, 114-120, Materials Science and Engineering A, had johnson 162 Had johnson.



13.10.2020 in 04:27 Fenrijora:
You are absolutely right. In it something is also I think, what is it good thought.

17.10.2020 in 03:29 Migore:
In my opinion you are not right. I am assured. Let's discuss it. Write to me in PM.

18.10.2020 in 15:36 Mekinos:
I congratulate, this remarkable idea is necessary just by the way